 |
|
| Question: |
|
Where should I place the KODAK PROFESSIONAL 9810 Digital Photo Printer?
|
|
| Answer: |
Answer last updated:10-03-05 |
|
Keep the following guidelines in mind when you select a location:
- Do not place the printer in locations with high humidity and dust.
- Do not expose the printer to direct sunlight or place the printer near heating appliances. Extremely high temperatures may deform the cabinet or cause other damage.
- Avoid placing the printer in areas where ventilation ducts, open doors, or frequent passers-by might expose it to debris.
Airborne dirt particles can cause image quality problems.
- Avoid locations where the printer is likely to be exposed to oily fumes and vapors.
- Place the printer on a hard, level, horizontal surface. Ventilation slots and holes are provided on the top and rear of the prnter. Allow the following minimum space around the printer to ensure proper ventilation:
- Top: 2 in. (5.08 cm)
- Sides: 0.5 in. (1.27 cm)
- Rear: 2 in. (5.08 cm)
Note: If the rear dust cover is in place (recommended), then no additional space is required at the rear.
When installing the unit in a system rack, leave space between the unit and the back of the rack.
- Protect the printer from dew formation. When the printer is moved from a cold area into a warm area, moisture can condense inside the unit and prevent operation. Allow the temperature to stabilize before use.
|
|
| Help us improve our site, did this answer your question? |
Do KODAK PROFESSIONAL Thermal Printers have drivers for the LINUX operating system?
How do I replace the print kit?
How can I pay for repairs made by Kodak?
|
|
|
|
